PUBLICATIONS

H-index in:

1.     Scopus : 27,

2.     Web of Knowledge : 21 

LIST OF PUBLICATIONS:

2017

 

Articles:

 

1.     H.Debski, T. Sadowski, Modelling of the damage process of interfaces inside WC/Co composite microstructure: 2-D versus 3-D modeling technique, Composite Structures 159 (2017) 121-127

2.     J.Gajewski, P.Golewski, T.Sadowski, Geometry optimization of a thin-walled elemnt for an airstructure using hybrid system integrating Artificial Naural Netwoerk and Finite Element Method, Composite Structures   (2017) accepted

 

 

2016

 

Monographs in preparation:

 

1.     T. Sadowski, E.Postek, Behaviur of Ceramic Tungsten Carbide Composites. Representative Volume Numerical Modeling, Springer-Verlag – signed contract 2016

2.     G.L.Golewski, T.Sadowski, Fracture Process in Concrete Containing Siliceous Fly Ash Additives: Macroscopic Fracture Toughness,  Springer-Verlag – signed contract 2016

 

Monographs:

 

1.     T. Sadowski, P.Golewski, Loadings in Thermal Barrier Coatings of Jet Engine Turbine Blades: An Experimental Research and Numerical Modeling, Springer-Verlag – 2016, pp. 107

 

Special Issues:

 

  1. J.Segurado, T. Sadowski, J.Llorca, S. Schmauder, (Eds) in the Journal Meccanicaon COMPUTATIONAL MICROMECHANICS OF MATERIALS, Meccanica 51 (2016) 269-473

 

Articles:

 

1.     T. Sadowski, B.Pankowski, Numerical modeling of two-phase ceramic composite response under uniaxial loading, Composite Structures 143 (2016) 388-394

3.     T. Sadowski, E. M. Craciun, A. Rabaea, L. Marsavina, Mathematical modeling of three equal collinear cracks in an orthotropic solid, Meccanica 51 (2016)  329-339

4.     I. V. Ivanov, D. S. Velchev, N. G. Georgiev, I. D. Ivanov, T. Sadowski, A plate finite element for modelling of triplex laminated glass and comparison with other computational models, Meccanica 51 (2016) 341-358

5.     V.N. Burlayenko, H. Altenbach, T. Sadowski, S.D.Dimitrova, Computational simulations of thermal shock cracking by the virtual crack closure technique in a functionally graded plate, Computational Materials Science 116 (2016) 11-21

6.     G.L.Golewski, T.Sadowski, Macroscopic evaluation of fracture process of ash fly concrete, Solid State Phenomena 254 (2016) 188-193

7.     T. Sadowski, M.Nowicki, D.Pietras, P.Golewski, The deformation process of thin-walled box beams jointed by rivets under three-point bending, Solid State Phenomena 254 (2016) 283-289

8.     T. Sadowski, P.Golewski, Numerical and experimental analysis of foreign objects impact into the surface with TBC coating, Solid State Phenomena 254 (2016) 224-230

9.     T. Sadowski, D.Pietras, Heat transfer process in jet turbine blade with functionally graded thermal barrier coating, Solid State Phenomena 254 (2016) 170-175

10.  G.L.Golewski, T.Sadowski, A study of mode III fracture toughness in young and mature concrete with fly ash additive, Solid State Phenomena 254 (2016) 120-125

11.  T. Sadowski, B.Pankowski, Peridynamical modeling of nanoindentation in ceramic composites, Solid State Phenomena 254 (2016) 55-59

12.  T. Sadowski, P.Golewski, V.Radoiu, The influence of hybrid material parameters in socked-pin connection on the value of opening force, Solid State Phenomena 254 (2016) 1-7

13.  T. Sadowski, P.Golewski, Crack path growth in turbine blades with TBC under thermo-mechanical cyclic loading, Fracture and Structural Integrity 35 (2016) 492-499

14.  E. Linul, D.A. Şerban, L.Marsavina, T.Sadowski, M.Kneć, Modeling of the energy-absorption and efficiency diagrams for rigid polyurethane foams under dynamic compression tests, Polymer Testing (in review) (2016)

 

 

2015

 

Monographs:

 

1.     Sadowski T., Balawender T., Golewski P., Technological Aspects of Manufacturing and Numerical Modelling of Clinch-Adhesive Joints, Springer-Verlag – 2015, pp. 59

 

2.     Altenbach H. Sadowski, T. (Eds) (2014): Failure and Damage Analysis of Advanced Materials, CISM Courses and Lectures No. 403, International Centre for Mechanical Sciences, Wien NewYork. Springer, Vol. 560

 

 

Articles:

 

1.     V.N. Burlayenko, H. Altenbach, T. Sadowski, An evaluation of displacement-based finite element models used for free vibration analysis of homogeneous and composite plates, Journal of Sound and Vibration 358, 4, (2015) 152-175

2.     Sadowski T., P.Golewski, “Description of non-stationary heat transfer in two-phase polycrystalline matal-ceramic composites”, Acta Physica Polonica A 128 (2015) 624-628

3.     Sadowski T., Birsan M., Pietras D., “Multilayered and FGM structural elements under mechanical and thermal loads. Part I: Comparison of finite elements and analytical models”, Arch. Civil & Mechanical Engineering 15 (2015)  1180-1192

4.     Sadowski T., P.Golewski, “Skew bending of aircraft fuselage panels with “L” and “C” stringers mounted by hybrid joint” Archives of Metallurgy and Materials 60 (2015) 2807-2813

5.     Sadowski T., P.Golewski, “the influence of geometrical parameters in socket - pin connections on the value of opening force” Archives of Metallurgy and Materials 60 (2015) 2732-2744

 

 

2014

 

Monographs:

 

1.     Sadowski T., Trovalusci P. (Eds), (2014): Multiscale Modelling of of Complex Materials, CISM Courses and Lectures No. 403, International Centre for Mechanical Sciences, Wien NewYork. Springer, Vol. 556

 

Special Issues:

 

1.     T. Sadowski, P. Trovalusci, B. Schrefler, R. de Borst (Eds) in the Journal Meccanicaon MULTI-SCALE AND MULTI-PHYSICS MODELLING FOR COMPLEX MATERIALS, Meccanica 49 (2014) 2549-2745

 

 

Chapters in books:

 

1.   Birsan M., Sadowski T.,  Pietras D., Cylindrical Orthotropic Thermoelastic Shells Modeled by Direct Approach”, Encyclopedia of Thermal Stress, Springer –Verlag (Ed: R.Hetnarski) 2014, 845-858

 

 

 

Articles:

 

1.     Sadowski T., Kneć M., Golewski P., Experimental investigation and numerical modelling of spot welding-adhesive joints response, Composite Structures 112 (2014), 66-77

2.     Burlayenko V.N., Sadowski T., “Nonlinear dynamic analysis of harmonically excited debonded sandwich plates using finite element modeling”, Composite  Structures 108 (2014) 354-366

3.     Gajewski J., Sadowski T., “Sensitivity analysis of crack propagation in pavement bituminous layered structures using a hybrid system integrating Artificial Neural Networks and Finite Element Method”, Computational Materials Science, 82 (2014), 114-117

4.     Dębski H., Sadowski T., “Modelling of microcracks initation and evolution along interfaces of the WC/Co composite by the finite element method”, Computational Materials Science 83 (2014), 403-411

5.     Golewski G., Sadowski T., “An analysis of shear fracture toughness KIIc and mictrostructure in concrete containing fly-ash”, Construction and Building Materials 51 (2014), 207-214

6.     Linul E., Serban D.A, Voiconi T., Marsavina L., Sadowski T., “Energy-absoprption and effiency diagrams of rigid PUR foams”, Key Engineering Materials 601 (2014), 246-249

7.     Sadowski T., Marsavina L., “Theoretical Meso-model of Al2O3/ZrO2 ceramic response under compression”, Key Engineering Materials, 601 (2014), 92-95

8.     Sadowski T., Pietras D., Ivanov I., “Estimation of thermal stress intensity factor in a strip with various property gradations subjected to thermal shock”, Key Engineering Materials 601 (2014), 71-75

9.     Craciun E., Sadowski T., Marsavina L., Rabaea A., ’’Mathematical aspects regarding cracks behavior in wood composites”, Key Engineering Materials 601 (2014), 108-111

10.  Sadowski T., Kneć M., Golewski P., “Fatigue response of hybrid joints obtained by hot spot welding and bonding techniques”, Key Engineering Materials 601, (2014), 25-28

11.  Burlayenko V.N., Sadowski T., “Transient dynamic response of debonded sandwich plates predicted with the finite element” Meccanica (in print)

12.  Petrova V. Sadowski T., Theoretical modeling and analysis of thermal fracture of semi-infinite functionally graded materials with edge cracks” Meccanica (in print)

13.  Marsavina L., Constantinescu D.M., Linul E., Apostol D., Voiconi T., Sadowski T., Evaluation of mixed mode fracture for PUR foams, Procedia Materials Science, 3 ( 2014 ) 1342 – 1352

14.  Marsavina L., Linul E., Constantinescu D.M., Apostol D., Voiconi T., Sadowski T., “Refinements on fracture toughness of PUR foams”, Engineering Fracture Mechanics (in print)

15.  Graziani L., Kneć M., Sadowski T., D’Orazio M., Lenci S., “Measurement of R-curve in clay brick blocks using Optical Measuring Technique’ Engineering  Fracture Mechanics, 121-122 (2014) 1-10

16.  Sadowski T., Pietras D., “Description of degradation process of rubberized lean concrete”, Solid State Phenomena, Vol. 216 (2014), 67-72

17.  Vocoini T., Linul E., Marsavina L., Sadowski T., Kneć M., “Determination of flexural properties of rigid PUR foams using Digital Image Correlation”, Solid State Phenomena, Vol. 216 (2014), 116-121

18.  Sadowski T., Golewski P., “Experimental and numerical investigations of TBC behaviour after aging, subjected to tension and bending”,   Solid State Phenomena, Vol. 216 (2014), 128-133

19.  Sadowski T., Golewski P., “Heat transfer in composites subjected to temperature variations”, Solid State Phenomena, Vol. 216 (2014), 140-145

20.  T.Sadowski, M.Kneć, P.Golewski, “Spot welding-adhesive joints: modelling and testing, Journal of Adhesion 90 (2014), 346-364

21.  E.-M. Craciun, Sadowski T., Rabaea A., „Stress concentration in an anisotropic body with three equal collinear cracks in Mode II of fracture. I. Analytical study” ZAMM, 94 (9) (2014) 721-729

 

2013

 

 

Articles:

 

1.     I.V.Ivanov, T.Sadowski, D.Pietras, “Crack propagation in functionally graded strip under thermal shock”, The Europ. Physical Jour. Special Topics 222, (2013) 1587-1595.

2.     T.Sadowski, P.Golewski, “Heat transfer and stress concentrations in a two-phase polycrystalline composite structure. Part I: Theoretical modeling of heat transfer”, Materials Science and Engineering Technology 44 (2013) 497-505.

3.     L. Marsavina, E. Linul, T. Voiconi, T.Sadowski, “A comparison between dynamic and static fracture toughness of polyurethane foam”, Polymer Testing 32 (2013), 673-680.

4.     L. Marsavina, Sadowski T., Kneć M., “Crack propagation paths in four point bend Aluminium-PMMA specimens”, Engineering Fracture mechanics 108 (2013), 139-151.

5.     M. Birsan, Sadowski T., Marsavina L., Linul E., Pietras D., “Mechanical behavior of sandwich composite beams made of foam and functionally graded materials”, International J. of Solids and Structures 50 (2013), 519-530.

6.   M. Birsan, Sadowski T.,  Pietras D., Thermoelastic deformations of cylindrical multi-layered shells using a direct approach,  Journal of Thermal Stress 36 (2013), 1-38

7.     T.Sadowski, P.Golewski, “Numerical study of the prestressed connectors and their distribution on the strength of a single lap, a double lap and hybrid joints subjected to uniaxial tensile test, Archives of Metallurgy and Materials, 58 (2013), 581-587.

8.     T.Sadowski, T.Balawender, R.Sliwa, M.Knieć, P.Golewski, “Modern hybrid joints in aerospace: modeling and testing”, Archives of Metallurgy and Materials, 58 (2013), 163-169.

9.     T.Sadowski, M.Kneć, “Application of DIC technique for monitoring of deformation process of SPR hybrid joints”, Archives of Metallurgy and Materials, 58 (2013), 119-125.

 

 

2012

 

Chapters in books:

 

2.   M.Boniecki, Z.Librant, T.Sadowski, W.Wesołowski, „The Thermal Shock Resistance and Mechanical Properties at Elevated Temperature of Transparent Ceramics”, Numerical Modelling of Materials under Extreme Conditions, Springer –Verlag (Eds: N.Bonora, E.Brown) 2012

 

Articles:

 

1.   B.Mircea, H.Altenbach, T.Sadowski, V.A. Eremeyev, D.Pietras, “Deformation analysis of functionally graded beams by the direct approach”, Composites Part B 43(2012), 1315-1328

2.   Lenci S., Clementi F., Sadowski T., “Experimental determination of the fracture properties of unfired dry earth”, Engineering Fracture Mechanics 87 (2012), 62-72.

3.   V Petrova., Marsavina L., Sadowski T., “Revisit of compact Mode II crack specimen: Analysis and fracture interpreparation, Theoretical and Applied Fracture Mechanics 59 (2012), 41-48.

4.   Burlayenko V., Sadowski T., “Finite element nonlinear dynamic analysis of sandwich plates with partially detached facesheet and core”, Finite Elements in Analysis and Design 62 (2012), 49-64.

5.   Golewski G., Golewski P., Sadowski T., “Numerical modeling crack propagation under Mode II fracture in plain concretes containing siliceous fly-ash additive using XFEM method, Comput. Mat. Sci. 62 (2012), 75-78.

6.   Petrova V., Sadowski T., “Theoretical analysis of Mode II cracks in a compact shear specimen, Comput. Mat. Sci. 64 (2012), 248-252.

7.   Sadowski T., “Gradual degradation in two-phase ceramic composites under compression”, Comput. Mat. Sci. 64 (2012), 209-211.

8.   Sadowski T., Golewski P., “Detection and numerical analysis of the most efforted places in turbine blades under real working conditions” Comput. Mat. Sci. 64 (2012), 285-288.

9.   Bieniaś J., Dębski H., Surowska B. a, Sadowski T., „”Analysis of microstructure damage in carbon/epoxy composites using FEM”, Comput. Mat. Sci. 64 (2012), 168-172.

10.    Balawender T., Sadowski T., Golewski P., “Numerical analysis and experiments of the clinch-bonded joint to uniaxial tension”, Comput. Mat. Sci. 64 (2012), 270-272.

11.    T.Sadowski, L.Marsavina, E.-M. Craciun, M.Knec, “Modelling and experimental study of parallel cracks propagation in an orthotropic elastic material”, Comput. Mat. Sci. 52 (2012) 231-235.

12.    T.Sadowski, P.Golewski,  " The influence of quantity and distribution of cooling channels of  turbine elements on level of stresses in the protective layer TBC and the efficiency of cooling" Comput. Mat. Sci. 52 (2012) 293-297.

13.    V.Burlayenko, T.Sadowski, “A numerical study of the dynamic response of sandwich plates initially damaged by low-velocity impact”, Comput. Mat. Sci. 52 (2012) 212-216.

14.    Sadowski T., Zarzeka-Raczkowska E., ”Hybrid adhesive bonded and riveted joints-influence of rivet geometrical layout on strength of joints, Archives of Metallurgy and Materials, 4/2012, vol. 57, 1127-1135.

15.    Golewski G., Sadowski T., “Experimantal investigation and numerical modeling fracture processes under Mode II concrete composites containing fly-ash additive at early age”, Solid State Phenomena, Vol. 188 (2012), 158-163.

16.    Sadowski T., Kneć M., “Experimental study of biomaterial shear strength and strain concentrations by losipescu based test using digital image correlation system”, Solid State Phenomena, Vol. 188 (2012), 226-231.

17.    Linul E., Marsavina L., Sadowski T., Kneć M., “Size effect on fracture toughness of rigid polyurethane foams”, Solid State Phenomena, Vol. 188 (2012), 205-210.

18.    Sadowski T., Golewski P., “The analysis of heat and thermal stresses in thermal barrier coatings under exploitation”, Defect and Diffusion Forum, Vol. 326-328, (2012), 530-535.

 

 

2011

 

Chapters in books:

 

1.   T.Sadowski, T.Balawender, „Technology Clinch-Adhesive Joints”, in “Hybrid Adhesive Joints” Springer-Verlag (Eds: L.da Silva, A.Pirondi, A.Oechsner) 2011, pp. 149-176.

2.   T.Balawender, R.Śliwa, T.Sadowski, “A new concept of rivets proposed to use in aeronautical construction”, in “Advances in Engineering Research”, Vol.1, Nova Science Publishers, Inc. 2011, pp. 295-308.

3.   V.Burlayenko, T.Sadowski,  Numerical Modeling of Sandwich Plates with Partially Debonded Skin-to-Core Interface for Damage Detection”, in “Advanced Structured Materials” Springer-Verlag (Eds: H.Altenbach, V.Ermeyev) 2011, 415-440.

4.   I.Ivanov, T.Sadowski, “Mechanical Response of Laminated Glass Subjected to Low Velocity Impact”, in “Advanced Structured Materials” Springer-Verlag (Eds: H.Altenbach, V.Ermeyev) 2011, 469-490.

 

 

Articles:

 

1.     S.Lenci, Q.Piattoni, F.Clementi, T.Sadowski, “An experimental study on damage evolution of unfired dry earth under compression”, Int. J. Fracture (2011) - accepted

2.     T.Balawender, T.Sadowski, M.Kneć, “Technological problems and experimental investigations of hybrid: clinched-adhesively bonded joint”, Arch. Metallurgy and Mat. 56 (2011) 439-446.

3.     T.Balawender, T.Sadowski, P.Golewski, “Experimental and numerical analysis of hybrid clinched – adhesive joints”, J. Adhesive Sci. and Technology 25 (2011) 2391-2407.

4.     L.Marsavina, T.Sadowski, N.Faur, “Numerical investigation of the stress field near a crack normal to ceramic-metal interface”, J. Mechanical Sci. and Technology 25 (2011) 309-315.

5.     E.Postek, T.Sadowski, “Assessing the Influence of Porosity in the Deformation of Metal-Ceramic Composites”, Composite Interfaces 18 (2011) 57-76.

6.     V.Burlayenko, T.Sadowski, “Dynamic behavior of sandwich plates containing single/multiple debonding”, Comput. Mat. Sci. 50 (2011) 1263-1268.

7.     T.Sadowski, P.Golewski, E. Zarzeka-Raczkowska, "Damage and failure processes of hybrid joints: adhesive bonded aluminium plates reinforced by rivets”, Comput. Mat. Sci. 50 (2011) 1256-1262.

8.     T.Sadowski, P.Golewski,  "Multidisciplinary analysis of the operational temperature increase of turbine blades in combustion engines by application of the ceramic thermal barrier coatings (TBC)" Comput. Mat. Sci. 50 (2011) 1326-1335.

9.     T.Sadowski, L.Marsavina, "Multiscale Modelling of Two-phase Ceramic Matrix Composites" Comput. Mat. Sci. 50 (2011) 1336-1346.

10.  T.Sadowski, J.Bec, "Effective Properties for Sandwich Plates with Aluminium Foil Honeycomb Core and Polymer Foam Filling - Static and Dynamic Response",  Comput. Mat. Sci. 50 (2011) 1269-1275.

 

 

2010

 

1.   S.Samborski, T.Sadowski, “Dynamic fracture toughness of porous ceramics”, Jour. Amer. Cer. Soc. 93 (2010) 3607-3609.

2.   V.Burlayenko, T.Sadowski, “Effective elastic properties of foam-filled honeycomb cores of sandwich panels”, Composite Structures 92 (2010) 2890-2900.

3.   L.Marsavina, T.Sadowski, M.Kneć, R.Negru, "Non-Linear Behavior of Foams under Static and Impact Three Point Bending", Int. J. Non-Linear Mechanics 45 (2010) 969-975.

4.   V.Burlayenko, T.Sadowski, “Free vibration of sandwich plates with impact-induced damage”, Proc. Appl. Math. Mech. 9 (2009) 178-180.

5.   T.Sadowski, M.Knec, P.Golewski, “Experimental investigations and numerical modelling of steel strip adhesive joint reinforced by rivets”, Int. J. Adhesion & Adhesives 30 (2010) 338-346.

6.   V.Burlayenko, T.Sadowski, “Influence of skin/core debonding on free vibration behaviour of foam and honeycomb cored sandwich plates”, Int. J. Non-Linear Mechanics 45 (2010) 959-968.

7.   K.Nakonieczny, T.Sadowski, Erratum: “Modelling of thermal shocks in composite materials using a meshfree FEM. Comput. Mat. Sci. 44 (2009) 1307-1311”,  Comput. Mat. Sci. 47 (2010) 867.

8.   T.Sadowski, L.Marsavina, “Multiscale modelling of gradual degradation in Al2O3/ZrO2 ceramic composites under tension”, Mat. Sci. Forum, 638-642 (2010) 2743-2748.

9.   L.Marsavina, T.Sadowski, N. Faur, “Asymptotic stress field for a crack normal to a ceramic – metal interface”, Key Eng. Materials, 417-418 (2010) 489-492.

 

 

2009

 

Articles:

1.     T.Sadowski, L.Marsavina, N.Peride, E.-M. Craciun, “Cracks propagation and interaction in an orthotropic elastic material: Analytical and numerical methods”, Computational Mat. Sci. 46 (2009) 687-693.

2.     T. Sadowski, S.Ataya, K. Nakonieczny, ” Thermal analysis of layered FGM cylindrical plates subjected to sudden cooling process at one side - comparison of two applied methods for problem solution”, Comput. Mat. Sci. 45 (2009) 624-632.

3.     K.Nakonieczny, T.Sadowski, “Modelling of thermal shocks in composite materials using a meshfree FEM”, Comput. Mat. Sci. 44 (2009) 1307-1311.

4.     I.Ivanov, T.Sadowski, “Numerical modelling and investigation of plywood progressive failure in CT tests”, Comput. Mat. Sci. 45 (2009) 729-734.

5.     V.Burlayenko, T.Sadowski, “Analysis of structural performance of aluminum sandwich plater with foam-filled hexagonal honeycomb core”, Comput. Mat. Sci. 45 (2009) 658-662.

6.     L.Marsavina, T.Sadowski, “Fracture parameters at bi-material ceramic interfaces under bi-axial state of stress”, Comput. Mat. Sci. 45 (2009) 693-697.

7.     L.Marsavina, T.Sadowski,, “Kinked cracks at bi-material ceramic interface – numerical determination of fracture parameters”, Comput. Mat. Sci. 44 (2009) 941-950.

8.     T.Sadowski, L.Marsavina, “Multiscale modelling of damage processes in polycrystalline ceramic porous materials”, Key Eng. Materials, 399 (2009), 79-88.

9.     I.Ivanov, T.Sadowski, “Micromechanical material model of wood veneer for numerical simulations of plywood progressive failure”, Key Eng. Materials, 399 (2009), 169-176.

10.  L.Marsavina, T.Sadowski, D.Constantinescu, R. Negru, “Polyurethane foams behaviour. Experiments versus modelling”, Key Eng. Materials, 399 (2009), 123-130.

11.  E.Craciun, T.Sadowski, “Mathematical modelling of the crack propagation in wood materials”, Key Eng. Materials, 399 (2009), 177-182.

 

 

2008

 

Books:

 

1.     R.de Borst, T.Sadowski (eds.), „Lecture notes on composite materials. Current topics and achievements.”  Springer-Verlag

                          http://www.springer.com/engineering/book/978-1-4020-8771-4?detailsPage=otherBooks&CIPageCounter=CI_MORE_BOOKS_BY_AUTHOR0

2.     S.Samborski,  T.Sadowski  “Cracks propagation in porous ceramic materials”- (in Polish)

3.     G.Golewski,  T.Sadowski  “Description of damage process in concrete composites including the influence of the material internal structure”  - (in Polish)

 

Articles puiblished:

 

1.     F. Felten, G. A. Schneider, T. Sadowski ”Estimation of R-curve in WC/Co cermet by CT test”, International Journal of Refractory Metals & Hard Materials, 26 (2008), 55-60.

2.     F.Clementi, S.Lenci, T.Sadowski, “Fracture characteristics of unfired earth”, Int. J. Fracture, 149 (2008), 193-198.

3.     L.Marsavina, T.Sadowski, D.Constantinescu, R. Negru, “Failure of polyurethane foams under different loading conditions”, Key Eng. Materials, 385-387 (2008), 205-208.

4.     T. Sadowski, K. Osina, ”Stress induced damage theory in application to modelling of matrix cracking in laminate polymer composites”, Computational Materials Science 43 (2008), 51-58.

5.     T. Sadowski, S. Samborski, ”Development of damage state in porous ceramics under compression”, Computational Materials Science 43 (2008), 75-81.

6.     T. Sadowski, G. Golewski, ”Effect of aggregate kind and graining on modeling of plain concrete under compression”, Computational Materials Science 43 (2008),  119-126.

7.     T. Sadowski, K. Nakonieczny, ”Thermal shock response of FGM cylindrical plates with various grading patterns”, Computational Materials Science 43 (2008), 171-178

8.     T. Sadowski, T. Nowicki, ”Numerical investigation of local mechanical properties of WC/Co composite”, Computational Materials Science 43 (2008), 235-241.

9.     L.Marsavina, T.Sadowski, “Dynamic fracture toughness of polyurethane foam”, Polymer Testing, 27 (2008), 941-944.

10.  Sadowski, T. Marsavina, L., Peride N., Craciun E. (2008): Cracks propagation and interaction in PMMA. Analytical and numerical methods. IWCMM’18, Bejing, October 2008

11.  Sadowski, T. and Marsavina, L. (2008): Multiscale modelling of damage process in polycrystalline ceramic porous composites. SML-85 at Timisoara, Romania, November 2008 (invited lecture)

12.  Craciun, E.-M. and Sadowski, T. (2008): Mathematical modelling of the crack propagation in wood material. SML-85 at Timisoara, Romania, November 2008 (invited lecture)

13.  Ivanov, I. and Sadowski T. (2008): Micromechanical material model of wood veneer for numerical simulations of plywood progressive failure. SML-85 at Timisoara, Romania, November 2008 (invited lecture)

14.  Marsavina, L. and Sadowski, T., Constantinescu, D. and Negru R. (2008): Polyurethane foams behaviour. Experiments versus modelling. SML-85 at Timisoara, Romania, November 2008 (invited lecture)

15.  Marsavina, L. and Sadowski, T. (2008): Crack – interface interaction in ceramic composites. NATO An Advance Research Workshop on Security and Reliability of Damaged Structures and Defective Materials at Metz, France, October 2008 (invited lecture)

16.  Ivanov, I., Sadowski T. and Filipiak, M. (2008): Numerical Modelling and Experimental Investigation of Progressive Failure in Plywood by Single Edge Notched Bending (SNEB) Test. Proceedings of the European Fracture Conference 17. Brno. Czech Republic, September 2008, 1656-1663.

17.  Marsavina, L. and Sadowski, T. (2008): The influence of bi-material interface on crack propagation path. Proceedings of the European Fracture Conference 17. Brno. Czech Republic, September 2008, 567-573.

18.  Sadowski, T. and Osina, K. (2008): Strain dependent continuum damage theory for description of polymer matrix composites. Proceedings of 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) at Venice, Italy, June/July 2008,  CD-ROM: a880.pdf.

19.  Burlayenko, V. and Sadowski, T. (2008): Finite Element Analysis of dynamic responses for honeycomb sandwich plates initially damaged by skin/core partial debonding. Proceedings of 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) at Venice, Italy, June/July 2008,  CD-ROM: a1602.pdf.

20.  Postek, E. and Sadowski, T. (2008): Description of a composite with weak filling material by model with voids. Proceedings of 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) at Venice, Italy, June/July 2008, CD-ROM: a3013.pdf.

21.  Sadowski, T., Nowicki, T. and Jonak, J. (2008): Image-based numerical investigation of mechanical properties in WC/Co composite under compression. Proceedings of 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) at Venice, Italy, June/July 2008, CD-ROM: a1604.pdf.

22.  Podgórski, J., Sadowski, T. and Nowicki, T. (2008): Crack propagation analysis in the media with random structure by fine mesh window technique. Proceedings of 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) at Venice, Italy, June/July 2008, CD-ROM: a1634.pdf.

23.   Marsavina, L. and Sadowski, T. (2008): The influence of the interface on fracture parameters. In: 1st African Interquadrenial ICF Conference : Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures at Algiers, Algeria, June 2008

24.  Sadowski, T. and Golewski, G. (2008): On the mesomechanical modelling of plain concrete with different grain-size distribution. In: Proceeding s of the 2nd Int. Conference on Concrete Modelling, Delft, The Netherlands, May 2008, 559-567.

25.  Sadowski, T. and Bęc, J. (2008): Static and dynamic analyses of sandwich beams and plates with honeycomb core with foam filling. Proceedings of the EuroMech Colloquium 498, Kazimierz Dolny, Poland, May 2008, 296-299.

26.  Burlayenko, V. and Sadowski, T. (2008): Influence of skin/core debonding on free vibration behaviour of foam and honeycomb cored sandwich plates. Proceedings of the EuroMech Colloquium 498, Kazimierz Dolny, Poland, May 2008, 108-111.

27.  Marsavina, L. Sadowski, T., Negru, R. and Kneć, M. (2008): Non-linear behaviour of foams under static and dynamic loading. Proceedings of the EuroMech Colloquium 498, Kazimierz Dolny, Poland, May 2008, 237-241.

28.  Pyrz, R. Sadowski, T. and Osina, K. (2008): Mechanical response of porous polymer matrix composites: experiments and theoretical modelling. Proceedings of the EuroMech Colloquium 498, Kazimierz Dolny, Poland, May 2008, 282-286.

29.  Samborski, S., Sadowski, T., Marsavina, L. and Kneć, M. (2008): Crack propagation in porous ceramics under impact loading in 3-point bending test. Proceedings of the EuroMech Colloquium 498, Kazimierz Dolny, Poland, May 2008, 300-305.

30.  Sadowski, T. and Golewski, G. (2008): An analysis concerning the influence of coarse aggregate on the modelling of concrete under compression. Proceedings of the 16th International Conference opn Analytical Models and New Concepts in Concrete and Masonary Structures in Łodź, Poland, June 2008, CD-ROM

31.  Sadowski, T., Filipiak, M. and Kneć, M. (2008): Experimental investigation of progressive degradation in plywood. Proceedings of the 7th Youth Symposium on Experimental Solid Mechanics at Wojcieszyce, Poland, May 2008

 

 

2007

   

Articles published:

 

  1. T. Sadowski, E. Postek, Ch. Denis, ”Stress Distribution due to Discontinuities in Polycrystalline Ceramics Containing Metallic Inter-Granular Layers”, Computational Materials Science 39, 2007, 230-236
  2. T. Sadowski, M. Boniecki, Z. Librant, K. Nakonieczny, ”Theoretical Prediction and Experimental Verification of Temperature Distribution in FGM Cylindrical Plates subjected to Thermal Shock”, International Journal of Heat and Mass Transfer, 2007, 1-7.
  3. L.Marsavina, T.Sadowski, “Effect of biaxial load on crack deflection/penetration at bi-material ceramic interface”, Int. J. of Fracture, 148, 2007, 79-84.
  4. L. Marsavina, T. Sadowski, ”Stress Intensity Factors for an Interface Kinked Crack in a Bi-Material Plate Loaded Normal to the Interface, Int. J. of Fracture, 145, 2007, 237-243.
  5. T. Sadowski, (book review), D. Gross, T. Seelig, ”Fracture Mechanics with an Introduction to Micromechanics, Series Mechanical Engineering Series, Springer-Verlag, ZAMM (Z. Angew. Math. Mech.) 87, No.1, 2007.
  6. T. Sadowski, K. Mazurek, ”Stress Induced Damage Theory in Application to Modelling of Polymer Matrix Composites”, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland ,Computational Materials Science 2007.
  7. T. Sadowski, G. Golewski, ”Micromechanical Approach to Modelling of Plain Concrete”, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland Computational Materials Science 2007.
  8. T. Sadowski, T. Nowicki, ”Numerical Investigation of Local Mechanical Properties of WC/Co Composite”, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland, Computational Materials Science 2007.
  9. T. Sadowski, M. Boniecki. Z. Librant, K. Nakonieczny, ”Theoretical Prediction and Experimental Verification of Temperature Distribution in FGM Cylindrical Plates Subjected to Thermal Shock”, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland, Computational Materials Science 2007.
  10. S. Samborski, T. Sadowski, ”Investigation of Damage in Porous Ceramics Modelling and Experimental Testing, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland, Computational Materials Science 2007.
  11. G. Golewski, T. Sadowski, ,,Analiza uszkodzeń betonów na mineralnych kruszywach naturalnych i łamanych z wykorzystaniem metod mikroskopii skaningowej, Inżynieria Materiałowa 1/2007, 33-38.
  12. S. Samborski, T. Sadowski, ,,Ocena uszkodzenia porowatej ceramiki polikrystalicznej na podstawie analizy odkształceń w stanie jednoosiowego ściskania”, IV Międzynarodowe Sympozjum Mechaniki Zniszczenia Materiałów i Konstrukcji, Augustów 30.05-2.06.2007.
  13. T. Sadowski, M. Boniecki, Z. Librant, K. Nakonieczny ”On the problem of Cracks Propagation in FGM Ceramics under Non-Symmetric Thermal Shock”, 10 th International Conference and Exhibition of the European Ceramic Society, Berlin, June 17-21, 2007.
  14. T. Sadowski, S. Ataya, K. Nakonieczny, ”Non-Symmetric Thermal Shock in layered FGM Cylindrical Plates-Comparison of two Methods for Problem Solution”, 17 th International Workshop on Computational Mechanics of Materials, 22-24 August, Paris, 2007.
  15. K. Nakonieczny, T. Sadowski, ”Modelling of Temperature Shocks in Composite Materials using a Meshfree FEM”, 17 th International Workshop on Computational Mechanics of Materials, 22-24 August, Paris, 2007.
  16. L. Marsavina, T. Sadowski, " Fracture Parameters at Bi-Material Ceramic Interfaces under Bi-axial State of Stress", 17 th International Workshop on Computational Mechanics of Materials, 22-24 August, Paris, 2007.
  17. T. Sadowski, I. Ivanov, M. Filipiak, "Experimental Investigation and Modelling of Crack Propagation in Plywood by CT test", 17 th International Workshop on Computational Mechanics of Materials, 22-24 August, Paris, 2007.
  18. T. Sadowski, V. Burlayenko, "Analysis of structural performance of aluminum sandwich plates with foam-filled hexagonal cores", 17 th International Workshop on Computational Mechanics of Materials, 22-24 August, Paris, 2007.
  19. E. Postek, T. Sadowski, ”Description of the behaviour of cellural composite with weak filling material”, IUTAM Symposium on Mechanical Properties of Cellular Materials”, September 17-21, Paris, 2007.
  20. T. Sadowski, K. Osina, ”Strain induced continuum damage theory for constitutive modelling of polymer matrix composites”, ICSAM, September 2-6, Patras, Greece, 2007.
  21. T. Sadowski, V. Burlayenko, ”Finite-Element Free Vibration and Buckling Analyses of Sandwich Plates with Honeycomb and Foam Cores”, 2 nd International Conference ”Nonlinear Dynamics, Kharkov, 25-28 September,2007.
  22. M. Filipiak, T. Sadowski, ,,Badanie eksperymentalne procesów uszkadzania w warstwowych materiałach drewnopochodnych, I Kongres Mechaniki Polskiej, Warszawa 28-31.08.2007, 74.
  23. K. Osina, T. Sadowski, Modelowanie rozwoju uszkodzenia ortotropowego w laminatach o osnowie polimerowej, I Kongres Mechaniki Polskiej, Warszawa 28-31.08.2007, 86.

 

2006

 

1.      T. Sadowski (ed.) ”Multiscale Modelling of Damage and Fracture Processes in Composite Materials”, Proceedings of IUTAM Symposium, Springer, 2006.

2.      V.N. Kytopoulos, G.A. Papadopoulos, T. Sadowski, ”Damage and Loading Rate Effects on the Microfailure Behaviour of Al2O3 – Ceramics Studied by SEM”, Journal of Materials Science 41, 2006, 2121-2131.

3.      T. Sadowski, S. Hardy, E. Postek, ”A New Model for the Time-Dependent Behaviour of Polycrystalline Ceramic Materials with Metallic Inter-Granular Layers under Tension”, Materials Science and Engineering A 424 , 2006, 230-238.

4.      E. Sideridis, G.A. Papadopoulous, V.N. Kytopoulos, T. Sadowski, ”The Elastic Modulus and the Thermal Expansion Coefficient of Particulate Composites using a Dodecahedric Multivariant Model”, Proceedings of the IUTAM Syposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials, May 23-27, Kazimierz Dolny, 2005, Springer, 2006, 105-112.

5.      E. Postek, T. Sadowski, S. Hardy, ”Numerical Response of a Two-Phase Composite”, Proceedings of the IUTAM Syposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials, May 23-27, Kazimierz Dolny, 2005, Springer, 2006, 193-200.

6.      S. Samborski. T. Sadowski, ”Experimental Investigations and Modelling of Porous Ceramics”, Proceedings of the IUTAM Syposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials, May 23-27, Kazimierz Dolny, 2005, Springer, 2006, 269-276.

7.      T. Sadowski, K. Mazurek, ”Experimental Estimation and Theoretical Modelling of the Damage Process in Polymer-Matrix Composites”, Book of Abstracts, MCM 2006, XIV International Conference on Mechanics of Composite Materials, 29 May-2 June, Riga Latvia, 2006.

8.      T. Sadowski, K. Mazurek, ”Stress Induced Damage Theory in Application to Modelling of Polymer Matrix Composites”, Book of Abstracts, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland 2006.

9.      T. Sadowski, K. Mazurek, ”Experimental Investigation and Theoretical Modelling of Damage Growth in Polymer Matrix Composites, 35 Solid Mechanics Conference - SolMech, September 4-8, Kraków, Poland 2006.

10.  T. Sadowski, G. Golewski, ”Micromechanical Approach to Modelling of Plain Concrete”, Book of Abstracts, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland 2006.

11.  T. Sadowski, T. Nowicki, ”Numerical Investigation of Local Mechanical Properties of WC/Co Composite”, Book of Abstracts, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland 2006.

12.  T. Sadowski, Z. Librant, M. Boniecki, ”The Comparative Analysis of the Unsymmetric Thermal Shock Crack Propagation in Al2O3 and ZrO2 Bars”, CIMTEC 2006, Internationals Conferences on Modern Materials & Technologies, June 4-9, Acireale, Sicily, 2006, Advances in Science and Technology Vol. 45 (2006), 1640-1645.

13.  T. Sadowski, M. Boniecki. Z. Librant, K. Nakonieczny, ”Theoretical Prediction and Experimental Verification of Temperature Distribution in FGM Cylindrical Plates Subjected to Thermal Shock”, Book of Abstracts, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland 2006.

14.  E. Postek, S. Hardy, T. Sadowski, ”Finite Strain Behaviour of a Polycrystalline Ceramic Composite with Intergranular Layers”, The Plasticity’06, The 12 International Symposium on Plasticity and Its Current Applications, July 17-22, Halifax, Canada, 2006.

15.  E. Postek, T. Sadowski, Ch. Denis, ”Modelling of Metallic Inter-Granular Layers in Polycrystalline Ceramics, BMC-8, The Eighth International Symposium on Brittle Matrix Composites, October 23-25, Warsaw, Poland, 2006, 495-505.

16.  E. Postek, T. Sadowski, ”Parameter Design Sensitivity of a Polycrystalline Ceramic Composite with Intergranular Layers”, Book of Abstracts, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland 2006.

17.  S. Samborski, T. Sadowski, ”Investigation of Damage in Porous Ceramics Modelling and Experimental Testing, Book of Abstracts, IWCMM 16, 16 International Workshop on Computational Mechanics of Materials, September 25-26, Lublin, Poland 2006.

18.  S. Samborski, T. Sadowski, ”A New Micromechanics Based Predictive Method for Porous Ceramics Behaviour under Compression” BMC-8, The Eighth International Symposium on Brittle Matrix Composites, October 23-25, Warsaw, Poland, 2006, 507-516.

19.  G. Golewski, T. Sadowski, ”Fracture Toughness at Shear (Mode II) of Concretes Made of Natural and Broken Aggregates”, BMC-8, The Eighth International Symposium on Brittle Matrix Composites, October 23-25, Warsaw, Poland, 2006, 537-546.

20.  G. Golewski, T. Sadowski, ,,Analiza powstawania i wzrostu uszkodzeń w elementach betonowych metodą destrukcji naprężeniowej”, Aktualne problemy naukowo-badwcze budownictwa, Wydział Nauk Technicznych UWM, Olsztyn, 2006, 125-130.

21.  G. Golewski, T. Sadowski, ,,Mechanizm zniszczenia kompozytów betonowych przy ściskaniu w aspekcie teorii naprężeń krytycznych”, Przegląd Budowlany nr 5, maj 2006, 26-33.

22.  G. Golewski, T. Sadowski, ,,Rola matrycy cementowej w procesie powstawania kruchych uszkodzeń w kompozytach betonowych”, Przegląd Budowlany nr 7-8, lipiec-sierpień 2006, 36-39.

23.  G. Golewski, T. Sadowski, ,,Model kruchych uszkodzeń betonu”, Materiały Budowlane, 2/2006, 11-14.

24.  G. Golewski, T. Sadowski, ,,Wpływ uziarnienia kruszywa grubego na charakter pękania betonów wapiennych”, Drogownictwo nr 8, 2006,

272-275.

25.  G. Golewski, T. Sadowski, ,,Odporność na pękanie betonów przy zginaniu”, Drogownictwo nr 9/10, 2006, 307-311.

26.  G. Golewski, T. Sadowski, ,,Analiza wpływu kruszywa grubego na procesy rozwoju uszkodzeń betonów w różnych stanach obciążenia”, Drogownictwo nr 12/2006, 391-395.

 

 

 

EXEMPLARY LIST OF PUBLICATIONS:

 

2005

 

1.      T.Sadowski, S.Hardy, E. Postek, ”Prediction of the Mechanical Response of Polycrystalline Ceramics Containing Metallic Intergranular Layers under Uniaxial Tension”, Computational Materials Science, 2005, Vol. 34, 46-63.

2.    T. Sadowski, S. Samborski, Z. Librant, ”Damage Growth in Porous Ceramics”, Key Engineering Materials, 2005, Vol. 290, 86-93. 

3.   S.Samborski, T.Sadowski, “On the method of damage assessment in porous ceramics”, 11th Int. Conf. On Fracture, Turin March 20-25

4.   T.Sadowski, S.Hardy, E. Postek, „Time dependent mechanical response of polycrystalline ceramics containing metallic inter-granular layers subjected to uniaxial tension”, Euromech Coll. 466, Laughborough U.K. 20-22 July 2005,  Proccedings in  Material Science and Engineering A

5.   E. Postek , T.Sadowski, S.Hardy,  „The Mechanical Response of a Ceramic Policrystalline Material with Inter-granular Layers”,  Complas 2005, Barcelona, 5-8 September 2005

6.   T.Sadowski, Hardy, E. Postek, „Stress distribution due to blunt cracks in polycrystalline ceramics containing metallic inter-granular layers”, 15th Int. Workshop on Computational Mechanics of Materials, Dusseldorf  Germany, 19-20 September 2005, Proceedings in Computational Material Science

      7.  T.Sadowski, K.Mazurek, „Description of anisotropic damage in polymer matrix composites”, Euromech Coll. 473, Porto Portugal, 27-29 October 2005

     

2004

 

1.      T.Sadowski, A.Neubrand, “Estimation of the Crack Length after Thermal Shock in FGM Strip”, International Journal of Fracture, Vol. 127, 2004, 135-140.

2.   T. Sadowski, S. Samborski, ”On a Metod of Mechanical Characteristics Estimation of Porous Ceramics”, Maintenance and Reliability, No 4 (24)/2004,     34-36.

3.   T. Sadowski, S. Hardy, E. Postek, ”Modelling of Polycrystalline Ceramics Material Containing Interfaces Under Uniaxial Stress State”, Maintenance and         .

4.   S. Samborski, T. Sadowski, ”Porous Ceramics – Experimental Research and Modelling”, IUTAM 21 International Congress of Theoretical and Applied Mechanics ICTAM04  Abstracts Book and CD-ROM Proceedings August 15-21, Warsaw 2004

5.   T. Sadowski, S. Hardy, E. Postek, ”On the Role of Inter-Granular Layers in Polycrystalline Ceramics”, IUTAM 21 International Congress of Theoretical and Applied Mechanics ICTAM04 Abstracts Book and CD ROM Proceedings August 15-21, Warsaw 2004

6.   T. Sadowski, S. Samborski, Z. Librant, ”Damage Growth in Porous Ceramics”, Fractography of Advanced Ceramics, 2 International Conference, October 3-  6, Stara Lesna 2004.

 

 

2003

 

1.      T.Sadowski, S.Samborski, “Prediction of  mechanical behaviour of porous ceramics using mesomechanical modelling”, Computational Mat. Sci., 2003, Vol. 28, Iss. 3-4, 512-517

2.      T.Sadowski, S.Samborski, “Modelling  of  Porous  Ceramics  Response  to  Compressive  Loading”, Jour. American Ceramic Society, 2003, Vol.86 (12), 2017-2021.

3.      T.Sadowski, S.Samborski, “On the different behaviour of porous ceramic polycrystalline materials under tension and compression stress state”, Proc. Second MIT Conference on Computational Fluid and Solid Mechanics (J.Bathe, ed.) Vol.1, Cambridge, USA, June 17-20 2003, Elsevier, 615-618

4.      T.Sadowski, A.Neubrand, “Crack propagation under thermal shock in Al2O3/Al composite strip”, Proc. 9th Int. Conf. On the Mechanical Behaviour of Materials (ICM-9), Geneve, Switzerland, May 25-29, 2003, CD-ROM

5.      T.Sadowski, A.Neubrand, “Thermal Shock crack propagation in functionally graded strip”, Proc. Int. Symp. Brittle Matrix Composites 7, (A.M.Brandt, V.C.Li and I.H.Marshall, eds.), Zturek RSI and Woodhead Publ.,Warsaw-Cambridge, 2003, 81-90

6.      T.Sadowski, S.Hardy, E.Postek, “Prediction of mechanical response under uniaxial tension of polycrystalline ceramics containing metallic intergranular layers”, 13th International workshop, Magdeburg, September 22-23, Germany

 

1994 – 2002

 

 1.      T.Sadowski, S.Samborski: „Pore existence induced degradation of polycrystalline ceramics under quasi-static tension”, Proc. MesoMech’2002, Aalborg, Danmark, 26-30 August, 2002 , 205-211

2.      T.Sadowski “Dynamic damage process of quasi-brittle polycrystalline materials”, Proc. Eurodyn 2002, 2-5 września, Munich, Germany, Baklema, 1475-1479

3.      T.Sadowski, S.Samborski, Z.Mróz, „Gradual degradation of initially porous polycrystalline ceramics subjected to quasi-static tension”, IUTAM Symposium on „Analytical and Computational Fracture Mechanics of Non-homogeneous Materials”, Cardiff, 2001,  (B.Karihaloo, ed.), Kluwer, 2002, 401-405

4.   T.Sadowski, S.Samborski, „An influence of internal porosity on damage process in semi-brittle polycrystalline ceramics under compression”, Proc. IUTAM Symposium on „Theoretical and numerical methods in continuum mechanics of porous materials”, Stuttgart Germany, 2000, (W.Ehlers, ed.), Kluwer, 2001, 313-318

5.    T.Sadowski, S.Samborski, „On the problem of crack propagation in porous ceramic materials”, Folia Soc. Scient. Lublinensis, Vol. 9, 2000, 135-141

6.   T.Sadowski, S.Samborski, „Damage process of initially porous polycrystalline ceramics” Proc. Brittle Matrix Composites 6, (A.Brandt, V.C.Li, I.H.Marshall eds.) Warszawa 2000, Woodhead Publ. Ltd. Cambridge, 566-575

7.   T.Sadowski, S.Samborski, „Distributed crack propagation in porous ceramic materials”, Proc. MicroMat 2000, Berlin, Apr. 17-19 2000, (B.Michel, T.Winkler, M.Werner, H.Fecht eds.), Druckhaus Dresden GmbH, 851-854

8.   T.Sadowski, M.Boniecki, Z.Librant, C.Ruiz, „Fracture process of monolithic polycrystalline ceramic (Al2O3 and MgO) under quasi-static and dynamic loading”, Proc. Brittle Matrix Composites 5, (A.Brandt, V.C.Li, I.H.Marshall eds.) Warszawa 1997, BIGRAF and Woodhead Publ. Cambridge, 567-576

9.   T.Sadowski, „General description of distributed crack propagation problem in polycrystalline ceramic materials, Proc. Micro Mat’97 (Berlin 1997) (B.Michel, T.Winkler eds.), Druckhaus Dresden GmbH, 1997, 416-419

10.  T.Sadowski, „Thermodynamic approach to constitutive modelling of semi- brittle ceramics”, IUTAM Symposium (Dublin 1996) Computational Mechanics,  1997, Vol. 20, 150-155

11.  T.Sadowski, "Micro-mechanical approach to modelling of damage process in semi-brittle ceramics", Proc. IUTAM Symposium on: „Micro-mechanics of Plasticity and Damage of Multiphase Materials",  Kluwer, 1996, 239-246

12.   T.Sadowski, "Mechanical response of semi-brittle ceramics subjected to tension-compression state. Part II: Description of deformation process", Int. J.  Damage Mechanics, Vol. 4, 1995, 293-318

13.  T.Sadowski, "Modelling of semi-brittle ceramics behaviour under a quasi-static deformation process", Proc. IUTAM Symposium on: „Anisotropy, In-homogeneity and Non-linearity in Solid  Mechanics”, Kluwer, 1995, 281-286

14.   T.Sadowski, "Mechanical response of semi-brittle ceramics subjected to tension-compression state. Part I: Theoretical modelling", Int. J. Damage Mechanics, Vol.3, 1994, 212-233

15.   T.Sadowski, "Modelling of semi-brittle ceramic behaviour under compression state", Mech. of Materials, Vol. 18, 1994, 1-16

 

 

 

********************************************************************************************************************************************************************************* 

BOOKS:

 

  1. T.Sadowski (Ed.), “Multiscale Computational Damage Modelling of Laminate Composites”,  IUTAM Symposium, Series: Solid Mechanics and its Applications, No 135, Springer-Verlag, Wien - New York, 2006

                    http://www.springer.com/engineering/book/978-1-4020-4565-3   

  1. T.Sadowski (Ed.), “Multiscale Computational Damage Modelling of Laminate Composites”, CISM Courses and Lectures No 474, Springer-Verlag, Wien - New York, 2005

                     http://www.springer.com/springerwiennewyork/engineering/book/978-3-211-29558-8       

  1. A.Malicki, T.Sadowski „Selected problems of theory of elasticity”, Techn. Univ. Lublin Press 2001, p. 254 (in Polish)
  2. T.Sadowski: „Description of damage and limit conditions in ceramic materials”, Tech. Univ. of Lublin Press, 1999, p. 318 - Habilitation thesis (in Polish)
  3. T.Sadowski, „Analysis of cracking of polycrystalline ceramic materials”, Techn. Univ. of Lublin Press, 1997, p 131 (in Polish)

 

 

In preparation:

 

1.     T.Sadowski, Z.Mróz, H.Altenbach, S.Hardy „Damage and fracture mechanic for engineers” – in preparation for Springer-Verlag

 

 

 TEXTBOOKS:

 

1.     T.Kazmir, C,Komorzycki, T.Sadowski, A.Teter , “Testing of mechanical properties of materials”, Technical Univ. Lublin Press 2001, p. 186 (in Polish)

 

 

********************************************************************************************************************************************************************************* 

EDITION in JOURNALS:

 

1.     Associate Editor in Meccanica – from January 2012 - …..

2.     International Editoral Board in Épitőanyag (Journal of Silicate Based and Composite Materials) (Hungary): from January 2010 - ….

3.     International Editoral Board in Analele Universsity “Ovidius” din Constanta, Mathematical Series (Romania): from July 2016 - …

4.     Guest Editor in Meccanica (Springer), 51 (2016) 269-473

5.     Guest Editor in Meccanica (Springer), 49 (2014) 2549-2745

6.     Guest Editor in Computational Materials Sciences (ELSEVIER), July 2008, Vol. 43, No 1

7.     Managing Editor in  Archive of Applied Mechanics (SPRINGER): from 1992 - Vol. 62, No 6 to 1995 – Vol. 66, No 8)

 

********************************************************************************************************************************************************************************* 

 

 

REVIEWS of PAPERS to the JOURNALS:

 

ELSEVIER:

1.     Aerospace Science and Technology

2.     Applied Mathematical Modelling

3.     Composite Science and Technology

4.     Composite Structures

5.     Composites Part A

6.     Composites Part B

7.     Computational Materials Science

8.     Construction and Building Materials

9.     Energy Conversion & Management

10.  Engineering Failure Analysis

11.  Engineering Fracture Mechanics

12.  European Journal of Mechanics – A/Solids

13.  International Journal of Adhesion &Adhesives

14.  International Journal of Mechanical Sciences

15.  International Journal of Plasticity

16.  International Journal of Solids and Structures

17.  International Journal of Sounds and Vibration

18.  Journal of Alloys and Compounds

19.  Journal of Materials Science & Technology

20.  Journal of Materials Processing Technology

21.  Journal of the Mechanical Behavior of Biomedical Materials

22.  Material Science and Engineering A

23.  Materials Characterization

24.  Materials Chemistry and Physics

25.  Mechanics Research Communication

26.  Ocean Engineering

27.  Powder Technology

28.  Surface and Coating Technology

29.  Theoretical and Applied Fracture Mechanics

 

SPRINGER

30.  Acta Mechanica

31.  Archive of Applied Mechanics

32.  Experimental Mechanics

33.  International Journal of Fracture

34.  Journal of Marine Science and Technology

35.  Journal of Materials Science

36.  Journal of Mechanical Science and Technology

37.  Meccanica

 

Wiley – InterScience, Blackwell

38.  Advanced Biomaterials

39.  Journal of Applied Polymer Sciences

40.  Polymer Composites

41.  Strain – An International Journal for Experimental Mechanics

42.  ZAMM

 

BRILL

43.  Multidiscipline Modeling in Materials and Structures

 

Taylor & Francis

44.  Composite Interfaces

45.  Heat Transfer Engineering

46.  Mechanics of Advanced Materials and Structures

47.  International Journal for Computational Methods in Engineering Science & Mechanics

48.  Journal of Adhesion Science and Technology

49.  Journal of Thermal Stress

50.  Materials and Manufacturing Processes

51.  The Journal of Adhesion

 

SAGE

52.  International Journal of Damage Mechanics

53.  Journal of Composite Materials

54.  Journal of Mechanical Engineering Sciences

 

Oxford University Press

55.  Quartely Journal of Mechanics and Applied Mathematics

 

IOP – electronic journals

56.  Journal of Physics C: Solid State Physics

57.  Modelling and Simulation in Material Science and Engineering

 

Trans Tech Publ inc.

58.  Advanced Materials Research

59.  Key Engineering Materials

60.  Solid State Phenomena

 

International journals (ICI Master Journal List)

61.  Advances in Materials Science and Engineering

62.  Engineering

63.  Entropy

64.  Indian Journal of Engineering and Material Sciences

65.  Iranian Polymer Journal

66.  Journal of Applied Mathematics

67.  Journal of Applied Physics

68.  Journal of Civil Engineering (KSCE)

69.  Journal of Information Technology and Application in Education

70.  Journal of the Brazilian Society of Mechanical Sciences

71.  Materials

72.  Sadhana - Academy Proceedings in Engineering Science

73.  Engineering Applications of Computational Fluid Mechanics

74.  Journal of Solids and Structures

 

Polish journals

75.  Archives of Materials and Metallurgy

76.  Archives of Mechanics

77.  Journal of Theoretical and Applied Mechanics

78.  Engineering Transactions

79.  Archive of Civil Engineering

 

 

 

 

 

 

Click here to go back